1/64 Frac tank kit with wheels $40.00 usd plus shipping.
Step 9 - Add the ribbed sides.
Step 10 - Glue the suspension parts into the mount plate.
Step 6 - glue the front into the body.
Frac trailer styrene plastic kit
1/64 , 1/53 , 1/50
Step 0 - Gather a sanding block and knife and (I use CA super glue for assembly but other glues may work)
Step 1 - Start with the bottom.
Step 2 - Dry fit a side then glue.
Step 11 - Attach the suspension part into the body.
Step 12 - Attach the front framework and support pieces.
Step 13 - Add the thin outer side pieces for detail.
Step 14 - Add the assembled ladder section and glue to the front of the body.
Step 15 + Add the detail pieces and king pin as needed or however you want it to look.
Step 16. Paint
Step 7 - Glue the 2 rear panels together and insert into the rear of the body.
Step 8 - Fit the top on and glue it on.
Step 3 - Add the rear vertical piece.
Step 4 - add the 2nd side
Step 5 - glue these 2 pieces together to create the front. The 2 holes in the front to the bottom.